Vancouver · Kensington-Cedar Cottage
Poly-B in Kensington-Cedar Cottage, Vancouver, BC
A fact-checked homeowner guide to polybutylene plumbing in Kensington-Cedar Cottage: how to spot it, what insurers ask, and what replacement typically costs.
Build era · Kensington-Cedar Cottage
How much of Kensington-Cedar Cottage was built in the poly-B years?
Most of Kensington-Cedar Cottage was built outside the poly-B window, but 3,170 of its 12,912 residential properties (25%) carry a 1978–1998 construction year. The median recorded build year is 1986, squarely inside the window. Across Vancouver, 31% of assessed homes fall in the same window; Kensington-Cedar Cottage ranks 16 of 21 communities on this measure.
Residential properties by construction decade · Kensington-Cedar Cottage
Decades inside the 1978–1998 poly-B window1970s — only 1978–79 fall insideOutside the window
Some exposure
- Residential properties12,912
- Built 1978–19983,170
- Median build year1986
Source: City of Vancouver Open Data — Property tax report (report year 2026), year built as assigned by BC Assessment. Build year is a strong clue, not proof — only a look at the pipe confirms poly-B.
Identify · PB2110
What Poly-B Looks Like
- Grey, semi-flexible tubing stamped PB (often PB2110)
- Crimp rings (copper or aluminum) at fittings; some older installs used plastic (acetal) fittings
- Look for stress at tight bends, near hot-water runs, or kinks
Canadian references: Alberta Municipal Affairs Standata; CHOA (BC); CSA B137 withdrawal. For a room-by-room walkthrough, use the identification guide.
Copper crimp ringInsurance & Financing in Vancouver
Canadian brokers report many carriers ask about Poly-B. Underwriting may include surcharges, restrictions, or a requirement to replace before binding or on renewal. Always confirm with your broker early in your purchase process.
Smart main shut-off + leak sensors
Kitchen, bathrooms and the mechanical room are the places to cover first.
Verified home water pressure
Typically 40–60 psi; a pressure-reducing valve (PRV) if needed.
Hot lines and tight bends first
Prioritize hot-water lines and tight bends for early replacement.
Read the insurance guide
How British Columbia insurers handle poly-B, and what brokers ask.
Insurance lookupTypical Replacement Costs in Vancouver
Actual quotes depend on home size, access, and restoration. Published British Columbia ranges start around $8,000–$15,000 for a full-home repipe (Vancouver), depending on size, access and how much drywall has to be opened.
| Material | Pros | Cons |
|---|---|---|
| PEX-A / PEX-B | Flexible, fewer joints, lower cost | Requires approved fittings and support |
| Copper (L/M) | Durable, heat-tolerant | Higher cost; water chemistry dependent |
Estimate your own home with the cost calculator.
Quick Reference
- LocationKensington-Cedar Cottage, Vancouver, BC
- Last Updated2026-09-30
Common FAQs
Is Poly-B banned?
It's no longer acceptable in the National Plumbing Code of Canada. Provinces adopt and enforce the code locally.
Will my insurer cover me?
Underwriting varies by carrier and province. Many scrutinize Poly-B; ask your broker before waiving conditions.
If my Kensington-Cedar Cottage home was built in the 1980s or 1990s, does it definitely have poly-B?
No. Builders in the same street chose different materials, and many homes have been partly or fully repiped since. The build year tells you where to look; the pipe itself — grey, stamped PB2110 — is the only confirmation.
Vancouver communities with a similar build era
These 12 communities have the closest share of homes built 1978–1998 to Kensington-Cedar Cottage. The Vancouver hub lists all 41 community guides.
- Shaughnessy25% built 1978–1998
- Hastings-Sunrise24% built 1978–1998
- Riley Park26% built 1978–1998
- Sunset26% built 1978–1998
- South Cambie22% built 1978–1998
- Dunbar-Southlands21% built 1978–1998
- Marpole29% built 1978–1998
- Renfrew-Collingwood30% built 1978–1998
- Downtown30% built 1978–1998
- Arbutus Ridge31% built 1978–1998
- Kerrisdale31% built 1978–1998
- Oakridge33% built 1978–1998
HAUSE desk · Request
Get a Safe-Repipe Plan for Kensington-Cedar Cottage
Talk to a vetted local plumber about inspection, risk mitigation, and a staged repipe plan that fits your budget and renovation schedule. Send the details and the HAUSE desk replies with next steps — and, with your consent, a local replacement contractor.
- 01A person reads itThe HAUSE desk reviews the age of the home, what you found and how urgent it is.
- 02You get a replyBy email from info@hause.ca or by phone from 403-679-3100, with practical next steps.
- 03Matched where availableWith your consent, your request goes to a local replacement contractor so they can quote.
- 04You decideNo obligation. Use the guides and the cost calculator to compare what you are quoted.
Updated 2026-09-30 · Last verified: 2026-09-30 · Sources: Alberta Municipal Affairs Standata; CHOA (BC); CSA Group; Canadian brokers; municipal assessment open data