Calgary · Coventry Hills
Poly-B in Coventry Hills, Calgary, AB
A fact-checked homeowner guide to polybutylene plumbing in Coventry Hills: how to spot it, what insurers ask, and what replacement typically costs.
Build era · Coventry Hills
How much of Coventry Hills was built in the poly-B years?
A sizeable slice of Coventry Hills dates from the poly-B years — 1,659 of 5,513 residential properties (30%) have a recorded construction year from 1978 to 1998. The median recorded build year is 2002, after installers had moved on to PEX and copper. Across Calgary, 26% of assessed homes fall in the same window; Coventry Hills ranks 43 of 141 communities on this measure.
Residential properties by construction decade · Coventry Hills
Decades inside the 1978–1998 poly-B window1970s — only 1978–79 fall insideOutside the window
Notable exposure
- Residential properties5,513
- Built 1978–19981,659
- Median build year2002
- Plumbing improvement permits since 2018373
Source: City of Calgary Open Data — Current Year Property Assessments (Parcel) (4bsw-nn7w). Build year is a strong clue, not proof — only a look at the pipe confirms poly-B.
Identify · PB2110
What Poly-B Looks Like
- Grey, semi-flexible tubing stamped PB (often PB2110)
- Crimp rings (copper or aluminum) at fittings; some older installs used plastic (acetal) fittings
- Look for stress at tight bends, near hot-water runs, or kinks
Canadian references: Alberta Municipal Affairs Standata; CHOA (BC); CSA B137 withdrawal. For a room-by-room walkthrough, use the identification guide.
Copper crimp ringInsurance & Financing in Calgary
Canadian brokers report many carriers ask about Poly-B. Underwriting may include surcharges, restrictions, or a requirement to replace before binding or on renewal. Always confirm with your broker early in your purchase process.
Smart main shut-off + leak sensors
Kitchen, bathrooms and the mechanical room are the places to cover first.
Verified home water pressure
Typically 40–60 psi; a pressure-reducing valve (PRV) if needed.
Hot lines and tight bends first
Prioritize hot-water lines and tight bends for early replacement.
Read the insurance guide
How Alberta insurers handle poly-B, and what brokers ask.
Insurance lookupTypical Replacement Costs in Calgary
Actual quotes depend on home size, access, and restoration. Published Alberta ranges start around $5,000–$15,000 for a full-home repipe (Calgary), depending on size, access and how much drywall has to be opened.
| Material | Pros | Cons |
|---|---|---|
| PEX-A / PEX-B | Flexible, fewer joints, lower cost | Requires approved fittings and support |
| Copper (L/M) | Durable, heat-tolerant | Higher cost; water chemistry dependent |
Estimate your own home with the cost calculator.
Common FAQs
Is Poly-B banned?
It's no longer acceptable in the National Plumbing Code of Canada. Provinces adopt and enforce the code locally.
Will my insurer cover me?
Underwriting varies by carrier and province. Many scrutinize Poly-B; ask your broker before waiving conditions.
If my Coventry Hills home was built in the 1980s or 1990s, does it definitely have poly-B?
No. Builders in the same street chose different materials, and many homes have been partly or fully repiped since. The build year tells you where to look; the pipe itself — grey, stamped PB2110 — is the only confirmation.
Calgary communities with a similar build era
These 12 communities have the closest share of homes built 1978–1998 to Coventry Hills. The Calgary hub lists all 142 community guides.
- Elboya30% built 1978–1998
- Downtown Commercial Core31% built 1978–1998
- Glamorgan31% built 1978–1998
- Parkhill28% built 1978–1998
- Lincoln Park33% built 1978–1998
- Vista Heights33% built 1978–1998
- Windsor Park33% built 1978–1998
- Crescent Heights27% built 1978–1998
- Forest Heights27% built 1978–1998
- St. Andrews Heights26% built 1978–1998
- Lower Mount Royal26% built 1978–1998
- Glenbrook25% built 1978–1998
HAUSE desk · Request
Get a Safe-Repipe Plan for Coventry Hills
Talk to a vetted local plumber about inspection, risk mitigation, and a staged repipe plan that fits your budget and renovation schedule. Send the details and the HAUSE desk replies with next steps — and, with your consent, a local replacement contractor.
- 01A person reads itThe HAUSE desk reviews the age of the home, what you found and how urgent it is.
- 02You get a replyBy email from info@hause.ca or by phone from 403-679-3100, with practical next steps.
- 03Matched where availableWith your consent, your request goes to a local replacement contractor so they can quote.
- 04You decideNo obligation. Use the guides and the cost calculator to compare what you are quoted.
Updated 2026-09-30 · Last verified: 2026-09-30 · Sources: Alberta Municipal Affairs Standata; CHOA (BC); CSA Group; Canadian brokers; municipal assessment open data